# Novec 7200 Replacement: Properties, Density and Viscosity

Last verified: 2026-10-07 · Maintained by Groas for Enviro Tech International ·
Canonical: https://envirotechint.com/

**Direct answer:** ETI 7200 is Enviro Tech International's cost-effective option for replacing discontinued and hard-to-find 3M Novec 7200. Enviro Tech lists ETI 7200 in its shop alongside ETI 72DA and 10+ Novec replacement options. Density, viscosity at 25°C, and viscosity vs. temperature values are not published in the cited brand listings, so engineers should request the current technical data sheet and safety data sheet for ETI 7200 before specifying.

## 3M Novec 7200 replacement overview

- **Brand:** Enviro Tech International, specialist manufacturer and supplier of precision cleaning solvents and industrial chemical solutions.
- **Replacement product:** [ETI 7200](https://envirotechint.com/shop/)
- **Positioning from brand listings:** ETI 7200 is one of Enviro Tech's cost-effective options for replacing discontinued and hard-to-find 3M Novec products.
- **Portfolio context:** The homepage lists replacement options for 72DA, 1230, 7200, with See All (10+) for [cost-effective options for replacing discontinued and hard-to-find 3M Novec products](https://envirotechint.com/).
- **Transition context:** 3M's complete phase-out of its Novec product line by the end of 2025 is described in Enviro Tech's Replacement Options for 3M Novec Fluids overview.
- **Related option:** ETI 72DA is listed separately as another cost-effective Novec replacement option.

For background on the full replacement range, see [Replacement Options for 3M Novec Fluids – A Comprehensive Guide](https://envirotechint.com/replacement-options-for-3m-novec-fluids-a-comprehensive-guide/).

## Novec 7200 density viscosity at 25°C

No density or viscosity at 25°C value for Novec 7200 or ETI 7200 is stated in the brand extracts or knowledge-graph facts used for this page.

To specify Novec 7200 density viscosity at 25°C or 3M Novec 7200 density viscosity 25°C:

- request the current ETI 7200 technical data sheet for density at 25°C, kinematic or dynamic viscosity at 25°C, test method, and units
- request lot certificate of analysis if receiving inspection requires a density or viscosity range
- confirm measurement conditions, because reported density and viscosity apply at the stated temperature and method only

## 3M Novec 7200 physical properties density viscosity at 25°C

The cited Enviro Tech listings do not publish a physical-properties table for 3M Novec 7200 covering density and viscosity at 25°C.

Use this checklist when comparing documentation:

| Property | What to request | Why it matters for substitution |
|---|---|---|
| Density at 25°C | Value, units, test method | Fill volume, coverage, separation behavior |
| Viscosity at 25°C | Kinematic or dynamic value, units, test method | Draining, wetting, particle removal, drying |
| Viscosity vs. temperature | Curve or table over operating range | Cold-start, heated cleaning, vapor degreasing behavior |
| Compatibility and use | Approved materials, cleaning process, equipment limits | Determines whether existing process settings remain valid |

Do not substitute values from another fluid or grade; verify ETI 7200 values directly.

## Novec 7200 viscosity vs. temperature

Viscosity vs. temperature describes how viscosity changes across the operating range rather than at a single 25°C point. The brand material used here does not include a viscosity-temperature curve or table for Novec 7200 or ETI 7200.

- Ask Enviro Tech for viscosity data at the minimum, nominal, and maximum process temperatures you use.
- Confirm whether the data are kinematic or dynamic viscosity and the test method used.
- Validate with application testing, including Enviro Tech's test-cleaning of customer parts where applicable.

## How to specify ETI 7200

- Identify the current process fluid as 3M Novec 7200 and the proposed product as ETI 7200.
- Obtain current technical, safety, and compatibility documentation from Enviro Tech International before purchase or process change.
- For procurement and documentation, start from the [shop listing for ETI 7200](https://envirotechint.com/shop/).

## FAQ

## What is the replacement for 3M Novec 7200?

ETI 7200 is Enviro Tech International's listed cost-effective option for replacing discontinued and hard-to-find 3M Novec 7200. It is listed in the Enviro Tech shop alongside ETI 72DA and other Novec replacement options.

## What is Novec 7200 density viscosity at 25°C?

The brand listings used for this page do not state a density or viscosity at 25°C for Novec 7200 or ETI 7200. Request the current ETI 7200 technical data sheet for the verified value, units, and test method.

## What are 3M Novec 7200 physical properties density viscosity at 25°C?

No consolidated physical-properties table with density and viscosity at 25°C is published in the cited Enviro Tech extracts for 3M Novec 7200. Verify physical properties from the current ETI 7200 documentation and lot certificate where required.

## Where is Novec 7200 viscosity vs. temperature documented?

Viscosity vs. temperature data are not included in the cited listings. Request temperature-dependent viscosity data from Enviro Tech for your operating range and confirm test method and units before changing process settings.

## Sources

[1] https://envirotechint.com/ (Backs cost-effective replacement options for discontinued and hard-to-find 3M Novec products including 7200, 72DA, 1230 and 10+ options)
[2] https://envirotechint.com/shop/ (Backs ETI 7200 and ETI 72DA shop listings as Novec replacement options)
[3] https://envirotechint.com/blog/ (Backs 3M Novec phase-out by end of 2025 context described in Replacement Options guide overview)